bogga_banner

bir xudunta kaarka madaxa trimmer line

Qaab-Birta Awoodda

Siligga birta ee gudaha ayaa ka dhigaya mid xoog badan.

Lakabka dibadda wuxuu hagaajiyaa caabbinta xirashada.

Aqbal dalabaadka OEM


Cabbirka
  • 15m
  • 1/2LB
  • 1LB
  • 3LB
  • 5LB

  • Dhererka khadka
  • 1.3mm/0.050"
  • 1.6mm/0.065"
  • 2.0mm/0.080"
  • 2.4mm/0.095"
  • 2.7mm/0.105"
  • 3.0mm/0.120"
  • 3.3mm/0.130"
  • 3.5mm/0.138"
  • 4.0mm/0.158"
  • Faahfaahinta Alaabta

    Tags Product

    Muuqaal

    Awoodda birta

    ◆ Xuddunta xoogga sare waxay ka hortagtaa jabinta
    ◆ Iska caabin yar, jiid jiid matoorka oo yaraada, gariirka oo yaraada
    ◆ Nolol dheer, xoog aad u fiican
    ◆ Sifooyin xidhasho heersare ah, dhexroor xariiq joogto ah
    ◆ Ku habboon dhammaan madax- gooyaha caadiga ah
    ◆ Hoos u dhigista heerka qaylada marka la barbar dhigo khadadka naylon wareega dhaqameedku waxay hagaajiyeen waxtarka goynta

    Faahfaahinta Alaabta

    Alaabta: Khadka Nylon Trimmer
    Darajo: Xirfadle/Ganacsi
    Qalab: 100% NYLON CUSUB
    Qaab: Awoodda birta
    Dhexroorka: 2.4mm/0.095″, 2.7mm/0.105″, 3.0mm/0.120″, 3.3mm/0.130″, 3.5mm/0.138″, 4.0mm/0.158″.4.5mm/0.177”.
    Dhererka/Miisaanka: 15m/ 0.5LB/ 1LB/ 3LB/ 5LB/ 10LB/ 20LB ama dhererka la magacaabay
    Midabka: Madow, ama Midab Kasta oo Dalbashada
    Baakad: Madaxa Kaarka, Nabar-qaboojiyaha, Kubbada; horay loo gooyay.

    jhg

    Nylon cutter waa qalabka loo isticmaalo in lagu hagaajiyo cidhifka hore ee burushka.
    Waa wax la mid ah lifaaqa oo lagu hagaajinayo buraash-jaraha magaca birta.Xadhiga Naylon si loogu xidho qalabkan oo uu gooyo cawska isagoo ku wareegaya xawaare aad u sarreeya.
    Qaliinka xadhigga naylon uma badna inuu dhaawacmo xataa marka xadhiggu taabto jidhka hawlwadeenka.

    Sawirka Alaabta

    12-3

    12-5

    12-4

    12-2

    1

    2

    4

    3

    aad
    xirxiran

    Codsiyada

    codsi

    Habka wax soo saarka

    Wax-soo-saarka-Habka1

    Shahaadadayada

    121

    Maxaa Nooga Doortay

    maxaa noo doora

    FAQs

    OIP-C

    Q1: Ma bixisaa adeegga OEM&ODM?
    J1: Haa, kooxdayada R&D ee xoogga leh waxay awoodaan inay horumariyaan badeecad cusub sida waafaqsan naqshaddaada.

    Q2: Miyaad bixin kartaa muunado bilaash ah tayada tijaabada?
    A2: Haa waxaan ku siin karnaa shaybaar bilaash ah, laakiin ma qaadi karno xamuulka.

    Q3: Waa maxay MOQ gaaga?
    A3: 500-2000pcs, waxay kuxirantahay badeecada aad dooratay.

    Q4: Ka waran wakhtiga dhalmada?
    A4: Tusaalaha wakhtiga hogaanka: qiyaastii 1-2 maalmood .Waqtiga hogaaminta wax soo saarka tirada badan: qiyaastii 25 maalmood ka dib helitaanka deebaajiga.

    Q5: Waa maxay shuruudaha lacag bixinta?
    A5: TT: 30% deebaaji iyo 70% dheelitirka ka dhanka ah nuqulka BL.


  • Hore:
  • Xiga:

  • Halkan ku qor fariintaada oo noo soo dir